Cored Welding Wire - ELCOR M Mo
Standards
| TS EN ISO 17632-A | T 46 2 Mo M M 1 |
|---|---|
| EN ISO 17632-A | T 46 2 Mo M M 1 |
| EN ISO 17634-A | T MoL M M 1 |
| AWS A5.29 | E81T1 -A1M |
Chemical Composition of Weld Metal % (Typical)
| C | Si | Mn | Mo |
|---|---|---|---|
| 0.03 | 0.6 | 1.20 | 0.50 |
Typical Base Material Grades
- DIN: Hl, HII, 17Mn4, 19Mn5, 15Mo3, 16Mo3,
- EN: P 235 GH, P 265 GH, P 295 GH, 16 Mo 3, P 235 T1/T2-P355 N, L210-L485, S255-L460
- ASTM: A 161, A 204, A 302, Gr A plate, A335-P1 pipe
Mechanical Properties
| Heat Treatment | Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Impact Strength (ISO-V/-20°C) (Joule) | Impact Strength (ISO-V/ 0°C) | Impact Strength (ISO-V/+20°C) | Elongation ((Lo=5do) (%)) |
|---|---|---|---|---|---|---|
| SR | min.470 | 550 - 680 | min. 47 | 147 | 162 | min. 20 |
| AW | min.470 | 550 - 680 | min. 47 | 102 | 158 | min. 20 |
| SR: Stress Relieved (620 °C/1h furnace down to 300 °C / air), AW: As welded | ||||||
Features and Applications
- Metal type flux-cored wire which provides a smooth arc, low spatter and good weldability.
- This type of electrode is commonly used in the fabrication and erection of boilers and pressure vessels.
- Typical applications include the welding of C-Mo steel base metals such as ASTM.
- High efficiency type for economic production environments and Mo-steels up to 500 ⁰C.
- * Metal cored wire without slag primarily used with Argon/Carbon Dioxide shielding gas mixtures in the flat and horizontal-vertical positions, however, welds in other positions are also possible using the short-circuiting or pulsed arc modes of transfer.
- Fast freezing characteristics facilitate butt and fillet welding.
- Shielding gas: M21
Welding Positions
Welding Method
| FCAW |
|---|
| DC(+) |
Operating Data
| Product Code | Package Weight (Kg) | Package Type | Diameter (mm) | Diameter (inch) |
|---|---|---|---|---|
| ---- | 15 | D 320 | Ø1.2 | Ø3/64 |
