HARDCOR KST 55
Standards
| DIN 8555 | MF 3-GF-55-ST |
|---|---|
| TS EN 14700 | T Z Fe 3 |
| EN 14700 | T Z Fe 3 |
Chemical Composition of Weld Metal % (Typical)
| C | Mn | Cr | W | V |
|---|---|---|---|---|
| 0,30 | 0,28 | 3,8 | 4,5 | 0,40 |
Features and Applications
- Metal type flux-cored wire. Used for repairing hot and cold work tools. Machinability is very good.
- HARDCOR KST 55 is a metal type flux-cored wire which wear resistant alloy and can be applied to reclaim hot-forging dies.
- It can be applied to overlay the edges and flat areas of low alloyed high density steel tools.
- It is used in the repair of equipment that is subject to high wear such as buckets, excavators, crushers used in the mining industry.
- Shielding Gas: M21
Mechanical Properties
| Hardness (as welded) (HRC) |
|---|
| 52-57 |
Current Type
- D.C.(+)
Resistance Type and Level
Friction
Impact Resistance
High Temp.
Thermo Shock
Corrosive
Machining
Crack Resistance
Operating Data
| Product Code | Package Weight (Kg) | Diameter x Length (mm) / (inch) | Diameter x Length (mm) / (inch) |
|---|---|---|---|
| 3030500410 | 15 | 0.047” | 1.20 |
