GEKA ER 5183 TIG
|
|
| Brand: | GEKA |
|---|---|
| Model: | GEKA ER 5183 TIG |
Standards
| TS EN ISO 18273 | S Al 5183 / AlMg4,5Mn0,7(A) |
|---|---|
| EN ISO 18273 | S Al 5183 / AlMg4,5Mn0,7(A) |
| AWS A5.10 | ER 5183 |
Chemical Composition of Weld Metal % (Typical)
| Mn | Si | Cr | Fe | Mg |
|---|---|---|---|---|
| 0,80 | 0,40 | 0,20 | 0,40 | 5,00 |
Typical Base Material Grades
- ➢ AIMg 2.7 Mn, AIMg 3, AIMg 4.5 Mn, AIMg 4 Mn, AIMg 5, ➢ AIMgSi 0.5, AIMgSi, 0.7, AIMgSi 0.8, AIMgSi 1, AIMgSi 1 Cu, AIZn 4.5 Mg 1, AIZMgCu 1.5, ➢ G-AIMg 5 Si, G-AIMg 3, G-AIMg 5
Mechanical Properties
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation ((Lo=5do) (%)) |
|---|---|---|
| 170 | 250 | 20 |
Features and Applications
- It is used for joining of Aluminum alloys including more than 3% Mg
- The weld deposit has a good resistance to atmospheric influences and sea water
- Used in storage tanks, columns, and marine applications.
- It is recommended that preheating to 150°C before welding of plates thicker than 10mm
- In MIG welding, Ar, He, and Ar+He gas mixtures are used as shielding gases.
- In TIG welding, Ar gas is used as the shielding gas.
