Standards
| EN ISO 18273
|
S Al 5356 / AlMg5Cr(A) |
| EN ISO 18273
|
TS EN ISO 18273 |
| EN ISO 18273
|
S Al 5356 / AlMg5Cr(A) |
| AWS A5.10
|
ER 5356 |
Chemical Composition of Weld Metal % (Typical)
| Mn |
Si |
Cr |
Fe |
Cu |
| 0,20 |
0,25 |
0,20 |
0,40 |
0,10 |
Typical Base Material Grades
- AIMg 5, AIMg 4.5, AIMgSi 1, AIMg 2.5Mn, AIMg 2 Mn 0.8, AIMg 3, AIMg 3 Si, AIMg 4.5 Mn, ➢ AIMg Si 0.5, AIMgSi 0.7, AIMgSi 0.8, AIMgSi 1 Cu, AIZn 4.5 Mg 1 ➢ G-AIMg 5, G-AIMg 10, G-AIMg 3(Cu), G-AlMg 3, G-AIMg 3 Si
Mechanical Properties
| Yield Strength (N/mm²) |
Tensile Strength (N/mm²) |
Elongation ((Lo=5do) (%)) |
| 180 |
260 |
min.18 |
Features and Applications
- Used for joining magnesium alloy materials.
- The filler metal is suitable for anodizing and polishing.
- Used in storage tanks, columns, and marine applications.
- It is recommended that preheating to 150°C before welding of plates thicker than 10mm.
- In MIG welding, Ar, He, and Ar+He gas mixtures are used as shielding gases.
- In TIG welding, Ar gas is used as the shielding gas.
Welding Positions
