ELOX SG 430
Standards
| TS EN ISO 14343-A | G/W 17 |
|---|---|
| EN ISO 14343-A | G/W 17 |
| AWS A5.9 | ER 430 |
Chemical Composition of Welding Wire% (Typical)
| C | 0.05 |
|---|---|
| Si | 0.40 |
| Mn | 0.40 |
| Cr | 17.00 |
Typical Base Material Grades
- X 6 CrTi 17, X 20 CrNi 17 2
- AISI: 431, 430Ti
Mechanical Properties
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation ((Lo=5do) (%)) | Heat Treatment |
|---|---|---|---|
| min. 300 | min. 450 | min. 20 | PWHT |
| PWHT : Heat to 1400 ° F to 1450 ° F [760 ° C to 790 ° C], hold for two hours (–0, +15 minutes), furnace cool at a rate not exceeding 100 ° F [55° C] per hour to 1100 ° F [595 ° C] and air cool to ambient | |||
Features and Applications
- Applicability in surfacing to provide resistance to corrosion, wearing, and heat
- Weld metal maintains its hardness up to 500 ° C and is resistant to scaling up to 900 ° C.
- Requirement of use of for MIG : Ar+ %2.5 O2 or Ar+ %2.5 CO2 mix gas as shielding, for TIG : Ar gas as shielding
Welding Positions
Welding Method
| TIG |
|---|
| DC(-) |
| DC(+) |
Operating Data
| Product Code | Diametré x Length (mm) | Diameter x Length (inch) | Package Type | Weight (Kg) |
|---|---|---|---|---|
| 6011100403 | Ø1.00 | Ø0.040 | BS 300 Spool | 15 |
| 6011100366 | Ø1.20 | Ø0.047 | BS 300 Spool | 15 |
| 6011100376 | Ø1.60 | Ø0.062 | BS 300 Spool | 15 |
| 6011100367 | Ø2.40 x 1000 | Ø3/32 x 39 | Plastic Box | 5 |
